Arch Enterprises

Description:

Acoustic hoods or enclosures are one of the most effective means for containment of excessive noise and for the insulation of the workers from the noise. Even where silencers are used, they can only treat the air borne noise. The treatment of the mechanical noise from the blower, motor, etc. is beyond the scope of silencers. Thus, in order to achieve low noise levels, that are often statutory requirements, Noise Enclosures / Acoustic Hoods are required. The products have been designed for effective noise reduction of blowers placed inside Everest’s economical design provides noise reduction of 12-25 dB(A) bringing down the total noise emitted to safe acceptable limits.

Features:

• Noise Control Noise level reduction to the tune of 25-30% is achieved
• Mobility: The enclosures can be easily shifted or transported
• Ease of Maintenance: Adequate space is available inside the canopy for easy maintenance
• Elimination of Civil Work Enclosures are suitable for open installation and hence require no separate building or shed

Applications:
Used for noise reduction of blowers and other applications.

Description :

• Quieter Operation: The Tri-Lobe rotor enables smooth air output, with less pulsations. This results in a significant reduction of emitted sound.
• Longer Life: The smooth power cycles means less “impacting load” and results in longer bearing and unit life.
• A convenient sight glass makes it easy to check oil levels. Drain valve is mounted in the front of the unit, hence easily accessible.
• Direct coupled drive resulting in increased drive efficiency, reduced noise and longer service life.
• Built-in monitoring and safety equipment such as pressure gauge and safety relief valve.
• Anti-vibration pads absorb vibrations before they reach the floor.
• Easily mountable suction air filter with non woven polyester media for surface and depth filtration. Mean pore size 25 microns.

Description:

• Corrosion resistance

• Proper polishing

• Heat resistance

Description :
Everest Blowers proudly announces, we have received an order for Supply of Integrally Geared Turbo Blower from one of the top PSU - EPC companies for installation in FGD process of Central Govt. owned 2 x 500 MW Thermal Power Plant.

Specification :

Capacity: 9170 Nm3/hr

Differential Pressure: 9350 mmWc